Currently, the following versions are available:
By signing in to mBlock 5, you can have your projects automatically stored in the cloud. Try synchronizing your projects across devices (such as PCs and mobile devices) now!
When you drag a block in Scripts area, and right click on the block, you will can do these operation for the block as the above picture
When you drag a block in Scripts area, and right click on blank, you will can do these operation for the block as the above picture
Step 1) Download OSOYOO_UNO.mext device file from https://osoyoo.com/driver/mblock/osoyoo_uno.mext
Step 2) Run the mBlock PC software by double click the lovely Panda icon. you will see mBlock UI as following picture. Please delete the default device CyberPi by click the cross in the red circle.
Step 3) Drag and Drop osoyoo_uno_mext file(downloaded in Step 1) to mBlock software as following:
Now you will see a new device firmware in mBlock, see following picture:
Now mBlock software and OSOYOO_UNO device firmware have been successfully installed in our PC!
1) you need connect your Arduino board to your PC with a USB cable first. Then click the Connect button in the bottom of the mBlock software, you will see a USB window pop up,
2) select Show all connectable device check box , then a device drop-down menu will show up,
3) select your Arduino port from device drop-down menu
4) click Connect button to connect your PC to Arduino
5)After you PC is connected to Arduino UNO board, please click Upload button in the bottom of your software, then the code will be uploaded to Arduino UNO board:
For more information, please click user guide to learn more or visit the link: https://www.yuque.com/makeblock-help-center-en/mblock-5
DownLoad Url osoyoo.com